张立刚;谭甲兴;陶泽俊;王倩颖;李浩;娄绢平;孙道坤;薛东阳;

• 1:东北石油大学提高油气采收率教育部重点实验室
• 2:大庆钻探工程公司井下作业工程公司
• 3:大庆油田有限责任公司第二采油厂

摘要(Abstract)：

以有杆泵抽油井为例,引入井筒温度场计算的热流耦合模型和数值模拟方法,计算不同工况下采液过程和热洗过程中的油套环空和油管内的温度场分布。结果表明:采液过程中,随产液量和含水率增加,油管内各点温度逐渐升高,当产液量为0～85 t/d时,温升速率较快;当产液量超过85 t/d时,温度变化趋于平缓。热洗过程中,油套环空温度自上而下逐渐降低,油管内温度逐渐升高,随洗井温度和洗井排量增大,井下各点温度升高,但温升速率不同。井筒内温度数值模拟结果与实测结果符合率为96.59%～99.74%。该结果为反循环热洗油井清蜡提供指导。

关键词(KeyWords)： 反循环热洗;有杆泵;热流耦合;温度场;清蜡

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51504067);; 黑龙江省博士后基金项目(LBH-Z15031)

作者(Author): 张立刚;谭甲兴;陶泽俊;王倩颖;李浩;娄绢平;孙道坤;薛东阳;

Email:

DOI:

参考文献(References)：

• [1] 成庆林,甘亦凡,王志华,等.管输含蜡原油多相体系析蜡胶凝行为分子动力学模拟[J].东北石油大学学报,2020,44(4):56-65.CHENG Qinglin,GAN Yifan,WANG Zhihua,et al.Molecular dynamics simulation of precipitation and gelation behavior of waxy crude oil multiphase systen in the pipeline transportation [J].Journal of Northeast Petroleum University,2020,44(4):56-65.
• [2] 刘扬,王志华,成庆林,等.大庆原油管输结蜡规律与清管周期的确定[J].石油学报,2012,33(5):892-897.LIU Yang,WANG Zhihua,CHENG Qinglin,et al.The study of pipeline wax deposition law and pigging period for Daqing Waxy Crude Oil [J].Acta Petrol Sinica,2012,33(5):892-897.
• [3] 李坤豫,廖奉武,胡友林,等.伏龙泉气田结蜡机理及清防蜡剂研究[J].应用化工,2019,48(11):2559-2562.LI Kunyu,LIAO Fengwu,HU Youlin,et al.Study on wax formation mechanism and clear paraffin inhibitor in Fulongquan Gas Field [J].Applied Chemical Industry,2019,48(11):2559-2562.
• [4] KEATING J F,WATTENBARGER R A.The simulation of paraffin deposition and removal in wellbores [J].SPE 27871,1994:227-235.
• [5] 蔡均猛,张国忠,邢晓凯,等.含蜡原油管道蜡沉积研究进展[J].油气储运,2002,21(11):12-16.CAI Junmeng,ZHANG Guozhong,XING Xiaokai,et al.Research developments of wax deposition in waxy crude oil [J].Oil & Gas Storage and Transportation,2002,21(11):12-16.
• [6] 张井龙,徐德奎,王尊策,等.无杆泵井液力清蜡器运行规律模拟与试验研究[J].石油机械,2019,47(1):105-110.ZHANG Jinglong,XU Dekui,WANG Zunce,et al.Simulation and experimental study on operation of hydraulic wax removal device in rodless pumped well [J].China Petroleum Machinery,2019,47(1):105-110.
• [7] 牛彩云,周志平,常莉静,等.空心杆热洗清蜡工具的改进与应用[J].钻采工艺,2019,42(1):106-107.NIU Caiyun,ZHOU Zhiping,CHANG Lijing,et al.Improvement in empty-rod thermal wax-removal tool [J].Drilling & Production Technology,2019,42(1):106-107.
• [8] 刘晓燕,姜卉,刘仁强,等.我国原油结蜡及清防蜡的知识图谱分析[J].当代化工,2020,49(2):446-449.LIU Xiaoyan,JIANG Hui,LIU Renqiang,et al.Knowledge mapping analysis of wax formation and wax removal of crude oil in China [J].Contemporary Chemical Industry,2020,49(2):446-449.
• [9] 原国军.完善油井热洗清蜡工艺技术研究[J].石油天然气学报,2014,36(8):150-154.YUAN Guojun.Completing the technology of hot wash wax removal in oil wells [J].Journal of Oil and Gas Technology,2014,36(8):150-154.
• [10] 刘宏宇,杨兴华,韩冬机.采井集中热洗方法及节能效果分析[J].石油石化节能,2020,10(3):7-9.LIU Hongyu,YANG Xinghua,HAN Dongji.Centralized heat washing method and energy saving effect of sucker-rod pump well [J].Energy Conservation in Petroleum & Petrochemical Industry,2020,10(3):7-9.
• [11] 王枭.抽油机井热洗清蜡过程的温度场研究[J].内蒙古石油化工,2014,40(20):19-21.WANG Xiao.Study on temperature field of hot washing wax removal process in pumping wells [J].Inner Mongolia Petrochemical Industry,2014,40(20):19-21.
• [12] 张克舫,刘浩,赵政权,等.油井热洗清蜡过程中耦合温度场数学模型的建立及其分析解[J].化工管理,2019(2):143-144.ZHANG Kefang,LIU Hao,ZHAO Zhengquan,et al.Establishment and analytical solution of coupled temperature field mathematical model in the process of oil well hot washing and wax removal [J].Chemical Management,2019(2):143-144.
• [13] 廖凯.对油井水泥车热洗过程中参数变化规律的认识[J].化学工程与装备,2017(12):121-122.LIAO Kai.Understanding of parameter variation law of oil well cement truck during hot washing process [J].Chemical Engineering and Equipment,2017(12):121-122.
• [14] 金峰,娄志东.机采井热洗温度场变化对清蜡效果的影响[J].化学工程与装备,2016(5):58-64.JIN Feng,LOU Zhidong.Influence of temperature field change in hot washing of mechanical recovery wells on wax removal effect [J].Chemical Engineering and Equipment,2016(5):58-64.
• [15] 宋奇,罗江涛,王志明,等.油井结蜡点位置预测及结蜡规律讨论[J].石油化工应用,2016,35(12):31-33.SONG Qi,LUO Jiangtao,WANG Zhiming,et al.Prediction of wax deposition point position and discussion on wax deposition law [J].Petrochemical Application,2016,35(12):31-33.
• [16] 张健,黄晨光.三维瞬态方形管流的热流固耦合数值模拟[J].工程力学,2010,27(6):232-239.ZHANG Jian,HUANG Chenguang.Numerical simulation of 3-D transient thermo-fluid-solid couple flow in a rectangular channer [J].Engineering Mechanics,2010,27(6):232-239.
• [17] LI Ying,YU Lixiao,CHEN Hongyan.Application of liquid-solid coupled numerical simulation method in steady heat transfer calculation of an engine [J].Chinese Internal Combustion Engine Engineering,2007,28:19-27.
• [18] 徐准,梅明荣,任青文.基于热—流耦合的冷却水管降温效果及其参数敏感性分析[J].水利水电技术,2018,49(12):83-89.XU Zhun,MEI Mingrong,REN Qingwen.Cooling effect and parameter sensitivity analysis for cooling pipe based on thermal-fluid coupling [J].Water Resources and Hydropower Engineering,2018,49(12):83-89.