闫铁;李庆明;王岩;李井辉;毕雪亮;

• 1:东北石油大学提高油气采收率教育部重点实验室
• 2:大庆头台油田开发有限责任公司采油四区
• 3:东北石油大学计算机与信息技术学院

摘要：

根据水平井接触和受力特点,利用分段计算方法,建立水平井钻柱摩阻扭矩计算模型;采用三维纵横弯曲梁理论,计算钻柱BHA(底部钻具组合)段摩阻扭矩;采用软杆模型,求解BHA以上钻柱段的摩阻扭矩;对井眼曲率变化较大及刚度较大的加重钻杆井段软杆模型加以修正,考虑钻柱屈曲的影响,建立适合水平井的摩阻扭矩三维分段计算模型.应用结果表明,该模型计算精度较高,平均相对误差为10%,可为现场实践应用提供技术参考.

关键词： 摩阻扭矩;水平井;钻柱;分段计算模型;底部钻具组合;软杆模型

Abstract: In horizontal well dragging,torque of drillstring is a key factor that affects the extension of the horizontal displacement and well track control.Based on force features of the horizontal well,the paper calculates torque and drag of drillstring separately and establishes the calculation model.The torque and drag in BHA section is calculated applying the beam-column theory,and soft string model is used in upper BHA section,the modified soft string model is used for sections with large well curvature or heavy weight drill pipe by taking into consideration the stiffness of drillstring.In the given mechanical model,considering buckling behavior of drillstring effects,the segmental calculation model for torque and drag of drillstring in horizontal well is established.Field example shows that the model is of high precision and average error of the results in theoretical forecasting is 10% in comparison with the field test values,the result is reliable and offers some references for field application.

Keywords: drag/torque;horizontal well;drillstring;segmental calculation model;bottom hole assembly;soft string model

基金项目: 国家科技重大专项(2011ZX05021-006);; 黑龙江省博士后基金(LBH-Z10235)

通讯作者:

Email:

参考文献：

• [1]Johansick C A.Torque and drag in direction wells prediction and measurement[J].Journal of Petroleum Technology,1984,36(6):987-992.
• [2]Ho H S,NL Technology systems/NL industries inc.general formulation of drillstring under large deformation and its use in BHA a-nalysis[R].New Orleans:Society of Petroleum Engineers,1986:1-12.
• [3]Ho H S,NL Petroleum services.An improved modeling program for computing the torque and drag in directional and deep wells[R].Houston:SPE Annual Technical Conference and Exhibition,1988:407-418.
• [4]Sheppard M C,Wick C,Burgess T,et al.Designing well paths to reduce drag and torque[J].SPE Drilling Engineering,1987,2(4):344-350.
• [5]秦永和,付胜利,高德利.大位移井摩阻扭矩力学分析新模型[J].天然气工程,2006,26(11):77-79.
• [6]李子丰,刘希圣.水平井钻柱稳态拉力—扭矩模型及其应用[J].石油钻探技术,1992,20(4):1-6.
• [7]张建群.定向井中摩擦阻力模式及其应用的初步研究[J].大庆石油学院学报,1989,13(4):6-11.
• [8]韩志勇.井眼内钻柱摩阻的三维和两维模型的研究[J].石油大学学报:自然科学版,1993,17(增):44-49.
• [9]闫铁,张建群,孙学增,等.大庆水平井摩阻力分析[J].大庆石油学院学报,1995,19(2):1-5.
• [10]闫铁,马红滨,谷玉堂,等.钻柱在水平分支井段中的摩阻力分析[J].科学技术与工程,2010,10(22):5378-5380.
• [11]代奎,闫铁.水平井井眼摩阻因数的确定方法[J].大庆石油学院学报,1995,19(3):5-8.
• [12]马善洲,韩志勇.水平井钻柱摩阻力和摩阻力矩的计算[J].石油大学学报:自然科学版,1996,20(6):24-28.
• [13]白家祉,苏义脑.井斜控制理论与实践[M].北京:石油工业出版社,1990.
• [14]白家祉.纵横法对钻具组合的三维分析[J].石油学报,1989,10(2):60-66.
• [15]An H,Scott S L,Langlinais J P.Estimation bottom hole pressure in pumping oil wells:effect of high viscosity fluids and casingheadpressure[R].Dallas:SPE Annual Technical Conference and Exhibition,2000.
• [16]Aziz K,Govier G W,Ogarasi F.Pressure drop in wells producing oil and gas[J].JPT,1972,113:38-47.